Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Don't underestimate the forklift at the office. If the operation is not good, there will be major mishaps in mins, and there are several crashes including forklifts.
Instance 1: The forklift freight obstructed the vehicle driver's view, and the individual in front might not be found, leading to a rolling accident.
Case 2: In order to maintain the equilibrium of the forklift when raising heavy products, the employees utilized their body weight as the counterweight, which almost triggered casualties.
Case 3: The size of the forklift cargo surpasses the allowable width of the route and holds on the roadside shelf, which almost creates an mishap.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the employees illegally, the forklift driver does not put on the seat belt, the forklift lifter drops and the motorist is crushed when the forklift surrender.
Situation 7: The forklift driver did not use a safety belt and dropped from the automobile when it surrendered and was squashed.
Forklift operation should pay attention to these issues ：.
Beginning.
1. Before starting, observe the environments, and after confirming that there are no barriers that hinder the safety and security of driving, honk the horn initially and after that begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale should be secure prior to starting.
3. When the forklift starts with a tons, the vehicle driver should first confirm that the tons is steady and dependable.
4. The begin needs to be sluggish and consistent.
Driving.
1. When driving, the height between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast ought to be tilted backwards. .
2. Do not lift the fork too expensive when driving. When going into and leaving the task site or while driving, beware that there will be no obstacles overhead. When the lots is taking a trip, the fork must not be raised too high, which will impact the stability of the forklift. .
3. After discharging, the fork needs to be decreased to the normal driving position before driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal ought to be issued initially. High-speed sharp turns are prohibited. High-speed doglegs will certainly trigger the automobile to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to switch off the fire and slide, and it is prohibited to brake unexpectedly while driving with tons unless there are special situations.
6. When the forklift is running, it should obey the website traffic rules in the factory and must keep a certain safety and security range from the automobile in front. .
7. When the forklift is running, the tons must remain in the lowest setting that does not hinder the driving, and the gantry must be effectively tilted back. The tons shall not be elevated except when stacking or filling. .
8. The height of the tons must not block the vehicle driver's sight. In special conditions, when the thing affects the forward vision, drive at a reduced speed when turning around.
9. It is restricted to turn on the ramp, nor to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the manufacturing facility location is 5 km/h, and it should drive securely at a low speed when going into the production workshop area. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to depend on the fork to hold items and play a balancing role. .
12. If issues are located, they will certainly be repaired and reported in a prompt fashion, and they will certainly never ever run with ailments or hide them.
loading and unloading.
1. When fork-loading items, the distance between the two forks ought to be changed as required to make the tons of the two forks balanced and not skewed, and one side of the item must be against the rack. .
2. It is prohibited to deal with a single fork or use a fork top or pull. In unique circumstances, safety indication have to be established to advise surrounding pedestrians. Stand-on Electric Pallet Stacker .
3. In the process of loading and unloading things, the forklift must be stopped with the brake. .
4. The rate of the vehicle need to be slow-moving and consistent. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled things and hurt people. .
5. When utilizing a fork to fork Electric Forklift Truck for Warehouse the goods, the fork must be as deep as possible under the lots, and it ought to be kept in mind that the fork pointer ought to not touch other items or items. The load needs to be supported with minimal back tilt of the gantry to make sure that the tons does not slide backwards. The mast can be tilted onward somewhat when the lots is reduced to permit simple positioning of the tons and removal of the forks. .
6. It is forbidden to fork items at high speed and ram tough objects with the fork head. .
7. When the forklift is functioning, it is prohibited for individuals to stand around the fork, so regarding avoid the collapse of the goods and harm individuals. .
8. Overwhelming is banned, and it is restricted to make use of forks to raise personnel to participate in high-altitude procedures to avoid high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slip, put, round or roll things. .
10. It is not permitted to use forks to pick, transform pallet discharge.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you have to unload the goods or lower the fork frame.
2. Pull the parking brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique circumstances, such as the driver does not leave the car's line of vision and does not surpass 1 minute).
4. Eliminate the trick. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance ought to be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety efficiency of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and reliable.
4. Throughout the operation of the forklift, check whether the pressure and temperature level are typical.
5. After the forklift is running, the external leak must also be examined and the seals ought to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to inspect before leaving the auto;.
2. When you run into somebody before you during driving, you need to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight should be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be too sharp to avoid the tendency of "free switching";.
6. Running up and down the incline should be sluggish and consistent, and no switching on the incline is allowed.
7. Do not drive across the slope. When the slope is higher than 10%, the lorry ought to be driven in reverse when worsening;.
8. When the forklift personnel bring the goods and move on, if they experience big or hefty goods and go to the chauffeur's view, they need to take the reversing exercise
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Solitary fork operation is not allowed.
2. It is not enabled to lift the goods for cross country driving.
3. It is not permitted to grab the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not enabled to utilize inertia force to get the goods.
6. It is not enabled to utilize braking force to expatriation round or easy-to-roll things.
7. It is not permitted to bring individuals to work with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Car parking is not allowed under the list below conditions.
1. Curves, slim roadways, railway crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the section with the same size as the barrier ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844